XV950 BLACKLINE PART FITMENT INSTRUCTIONS…
“BLACKLINE” LEFT COVER:
a. Remove the original cover. keep the stock bolts for re-use.
b. you will need to remove some material from 2 spigots that remain from the manufacturing process. (see photo ) 1.1. only remove enough material so that cover can sit flat on the 3 bolt surfaces
c. you can now install the new cover using the stock bolts
“BLACKLINE” RIGHT COVERS:
a. Remove the original coverS. keep the stock bolts for re-use.
b) Clean up the inside surfaces.
c) use a little bit of medium threadlock on al the bolts.
d) tighten the bolts firm but dont overdo it
dont forget to send us a picture of your bike.