XV950 BLACKLINE PART FITMENT INSTRUCTIONS…

“BLACKLINE” LEFT COVER:

a.    Remove the original cover. keep the stock bolts for re-use.

b.    you will need to remove some material from 2 spigots that remain from the manufacturing process. (see photo ) 1.1.  only remove enough material so that cover can sit flat on the 3 bolt surfaces

photo1.1spigots

c. you can now install the new cover using the stock bolts IMG_2083

“BLACKLINE” RIGHT COVERS:

a.    Remove the original coverS. keep the stock bolts for re-use.RIGHT SMALL 2RIGHT LARGE 1

b) Clean up the inside surfaces.RIGHT LARGE 2

c)  use a little bit of medium threadlock on al the bolts.RIGHT SMALL 3

d) tighten the bolts firm but dont overdo it RIGHT LARGE 3RIGHT SMALL 4

dont forget to send us a picture of your bike.RIGHT LARGE 5

2 thoughts on ““BLACKLINE” ENGINE COVER FITTING

  1. Hallo,
    ich habe Interesse an der Abdeckung der Riemenscheibe von der XV950.
    Wann habt Ihr diese wieder im Programm oder könnt Ihr mir eine Zeichnung schicken?
    Über eine Antwort würde ich mich freuen.
    Gruß Ralf

    Like

    • Hi Ralf, thanks for your message. We are a little behind in production and hope to be able to have them back in stock within a month. If you can send us your email address I will keep you updated as soon as I have an exact date.
      PS We will release a new airfilter later this week. 😉
      Saludos, Tobbe Johansson

      Like

Leave a Reply to Ralf Schubert Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s